Through the previous introduction, I believe everyone has understood that the cable bridge has now become an indispensable bridge in the construction industry, which also shows that the bridge is a very important role in architecture, but we will always have more or less problems in the process of using the bridge. Today, Jinan cable bridge manufacturer shares with you in detail the problems that often occur when using the cable bridge.
1. All parts of the cable are short circuited. This type of fault may cause the current relay in the distribution cabinet to work, resulting in serious damage to the cable.
2. The internal short circuit of the cable is usually caused by the poor quality of the cable, and there is no wiring outside.
3. The fault is that the cable bridge in Jinan is only short circuited, and the faulty cable is slightly damaged, but there are still obvious traces.
4. The whole wire or one wire is burned somewhere, seriously damaging the wire at the fault location. The fault may be caused by excessive current or poor cable quality.
All mechanical equipment shall be inspected and maintained regularly after use. The cable tray manufacturer will introduce how to repair and maintain the cable tray:
1. Test and verify the working condition of the balance cylinder of the cable tray kit and its oil and gasket lubrication system.
2. Friction often occurs between sliding block and guide rail of cable bridge equipment. Be sure to make adjustments to correct it. Check the lubrication quality of connecting parts and pipes to ensure normal operation.
3. Regularly lubricate the gear part of the cable tray: due to frequent operation, the gearbox and internal parts are more likely to be damaged and loose.
The above is the knowledge brought to you today. Shandong cable bridge has focused on the industry for many years and continuously provided users with valuable content. Please continue to pay attention to us for more content: http://www.psgnm.com